Applications
Sensors
| Product | Purpose | Order Trial Quantity |
|
|---|---|---|---|
| 5051 |
Platinum
Conductor Metallo-organic for rtd (resistive temperature detector) applications, 0.2 µm fired thickness/layer |
 |
 |
| 5542 | Platinum
Conductor Porous electrode material for use on partially stabilized zirconia, for example, for oxygen sensors |
|
|
| 5544 | Platinum
Conductor For use on resistance thermometers and heaters, TCR>3,300 ppm/°C |
|
|
| 5559-B | Platinum
Conductor Co-firable conductor, with higher resistivity than 5571, for use as a heater in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 5570 | Platinum
Conductor Co-firable conductor for use as an electrode in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 5571 | Platinum
Conductor Co-firable conductor for use as a heater in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 5572 | Platinum
Conductor For use as the inner electrode on conical zirconia oxygen sensors |
|
|
| 5573 | Platinum
Conductor For use as the outer electrode on conical zirconia oxygen sensors, can be pad printed |
|
|
| 5574 | Platinum
Conductor Co-firable conductor for use as lead or contact pads in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 5575 | Platinum
Conductor Co-firable conductor for use as a via-fill in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 6642 | Palladium
Conductor Fritless Pd paste, available in screen-printable or pourable versions, for use on conical zirconia oxygen sensors |
|
|
| 5545 | Platinum
Conductor Excellent conductivity, for use on heating elements, etc. |
|
|
| 5545-LS | Platinum
Conductor Thinner printing version of 5545 |
|
|
| 8081-A | Gold
Conductor Metallo-organic, <1 µm fired thickness on alumina |
|
|
| 8837-G | Gold Conductor Very thin printing, for use in terminating resistors on strain sensors |
|
|
| 4441 | Multilayer Dielectric Screen-printable fugitive paste to form channels in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 4492 | Multilayer Dielectric Screen-printable alumina paste for use in forming insulating layers in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 4550 | Multilayer Dielectric Screen-printable zirconia paste for use as a porous overcoat to protect the Pt electrode in multi-layer ceramic structures such as planar oxygen sensors |
|
|
| 3414 Series | Resistor
Series For pressure sensors, strain gauges, etc., gauge factor = 14 - 19 |
|
|
| NTC-2100 Series | Resistor
Series For NTC thermistors, beta = 300 - 3,100 depending on resistivity |
|
|
| PTC-2600 Series | Resistor
Series For PTC thermistors, TCR » 4,000 ppm/°C for resistivity = 10 ohm/sq. |
|
|
| PTC-2600-I Series | Resistor
Series For PTC thermistors, TCR> 4,000 ppm/°C for < 10 ohm/sq. with higher viscosity than the PTC-2600 Series |
|
|
A range of ESL ElectroScience ceramic tapes for use in planar oxygen sensors and other multi-layer components is available. For details, please see the ESL web pages Ceramic Tapes and
Tape Systems. For further information, please contact ESL Technical Service personnel.
Green Products are Lead-Free, Cadmium-Free
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)
Green Products are Lead-Free, Cadmium-Free
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)