Products
Silver/Palladium Conductor Pastes
| Product | Purpose | Order Trial Quantity |
|
|---|---|---|---|
| 9627 |
Silver-palladium, for use as an interconnect paste in SOFC and other fuel cells |  |
 |
| 9633-G |
2/1, excellent leach and migration resistance | |
|
| 9635-HG |
General purpose 6/1 for use on alumina and on dielectric, excellent solderability over ESL dielectrics | |
|
| 9647 | 3/1, excellent solderability and large Al wire bondability | |
|
| 9693-G | Low cost, general purpose | |
|
| 9695-G | Low cost, high conductivity, for use on alumina, and as a termination for 29XXX resistors over dielectric on stainless steel | |
|
| C-964-G | For general use in hybrid circuit and component manufacture, smooth surface, good adhesion, excellent solderability and leach resistance | |
|
| 9633-T | For use on aluminum nitride | |
|
| 963 | Solderable, with excellent leach resistance, for use in LTCC systems | |
|
| 9635-B | 3/1, general purpose | |
|
| 9635-H | 6/1, excellent aged adhesion, Cd-free | |
|
| 9638 | 3/1, electrode for 4100 Series capacitor dielectrics | |
|
| 9693-S-A | For high-speed printing, excellent adhesion and solderability | |
|
| 9694-SA | High-speed printing cadmium-free palladium silver conductor, excellent adhesion, good solderability, and high conductivity | |
|
| 9695 | 20/1, wide firing range 625-930 °C | |
|
| 9695-P | For use in potentiometer applications, excellent wear resistance, solderability and adhesion | |
|
| C-964-A | Excellent solderability and leach resistance, compatible with 8835-1B, 4920 | |
|
Green Products are Lead-Free, Cadmium-Free
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)